论文
1.L. Di, Y. Yang, “Towards closed-loop material flow in additive manufacturing: Recyclability analysis of thermoplastic waste”, Journal of Cleaner Production (IF= 11.07). Volume 362 (2022).
2.L. Di, Y. Yang, “ Greenhouse Gas Emission Analysis of Integrated Production-Inventory-Transportation Supply Chain Enabled by Additive Manufacturing”, Journal of Manufacturing Science and Engineering (IF=3 .952). 144 (2022).
3.L. Di, Y. Yang, “Cost Modeling and Evaluation of Direct Metal Laser Sintering with Integrated Dynamic Process Planning”, Sustainability (IF=3.889). 13 (2021) 1–17.
4.W. Cui, Y. Yang, L. Di, and F. Dababneh, “Additive Manufacturing-Enabled Supply Chain: Modeling and Case Studies on Local, Integrated Production-Inventory-Transportation Structure”, Additive Manufacturing (IF= 11.632). 48, 102471, (2021).
5.W. Cui, Y. Yang, L. Di, “Modeling and optimization for static-dynamic routing of a vehicle with additive manufacturing equipment”, International Journal of Production Economics (IF= 11.85). 257, 132427, (2021).
6.F.Debabneh, Y. Yang, L. Di, and R. Hussein, “Investigation of Third-Party Electric Vehicle Battery Remanufacturing Supply Chains: Modeling and Case Studies”, Journal of Cleaner Production (IF= 11 . 07), under review, 2021.
7.Y. Yang, J. Zhao, L. Di, M. H. Kobir, “Driving Additive Manufacturing Towards Circular Economy: State-of- the-Art and Future Research Directions”, 3D Printing and Additive Manufacturing (IF= 5 . 355) , under review, 2023
8.A. Sotoodeh, L. Di, Y. Yang*, “Design of 3D printable LED heatsink inspired by firefly wings”, Proceedings ofthe ASME 2023 18th International Manufacturing Science and Engineering Conference MSEC2023, June 12-16, 2023, New Brunswick, New Jersey, USA, (2023).
9.M. A. U. A. Amin, Y. Yang*, M. H. Kobir, L. Di, “Experimental Study of Microscopic Morphology and Material Property for Recycled Polyamide 12 Powder in Selective Laser Sintering”, ASME 2022 International Manufacturing Science and Engineering Conference 2022, West Lafayette, Indiana, USA, (2022).
10.L. Di, G. Shah, and Y. Yang*, “Greenhouse Gas Emission Analysis of Integrated Production-Inventory Transportation Supply Chain Enabled by Additive Manufacturing”, ASME 2021 16th International Manufacturing Science and Engineering Conference, Cincinnati, OH, USA, (2021).
11.C. Kan, Z. Ye, Y. Yang, L. Di, D. Shah, D. Shah, “Multi-Extrusion Additive Manufacturing for Error Compensation: A Demonstrative Case Study”, ASME 2020 15th International Manufacturing Science and Engineering Conference, Cincinnati, OH, USA, (2020).
12.S. Wang, A. Sarrafan, T. Hoang, L. Di, Y. Yang, “An Optimal Control Approach for Additive Manufacturing Production with Waste Recycling Process”, IEEE Conference on Decision and Control, Singapore, 2025.
论文
1.L. Di, Y. Yang, “Towards closed-loop material flow in additive manufacturing: Recyclability analysis of thermoplastic waste”, Journal of Cleaner Production (IF= 11.07). Volume 362 (2022).
2.L. Di, Y. Yang, “ Greenhouse Gas Emission Analysis of Integrated Production-Inventory-Transportation Supply Chain Enabled by Additive Manufacturing”, Journal of Manufacturing Science and Engineering (IF=3 .952). 144 (2022).
3.L. Di, Y. Yang, “Cost Modeling and Evaluation of Direct Metal Laser Sintering with Integrated Dynamic Process Planning”, Sustainability (IF=3.889). 13 (2021) 1–17.
4.W. Cui, Y. Yang, L. Di, and F. Dababneh, “Additive Manufacturing-Enabled Supply Chain: Modeling and Case Studies on Local, Integrated Production-Inventory-Transportation Structure”, Additive Manufacturing (IF= 11.632). 48, 102471, (2021).
5.W. Cui, Y. Yang, L. Di, “Modeling and optimization for static-dynamic routing of a vehicle with additive manufacturing equipment”, International Journal of Production Economics (IF= 11.85). 257, 132427, (2021).
6.F.Debabneh, Y. Yang, L. Di, and R. Hussein, “Investigation of Third-Party Electric Vehicle Battery Remanufacturing Supply Chains: Modeling and Case Studies”, Journal of Cleaner Production (IF= 11 . 07), under review, 2021.
7.Y. Yang, J. Zhao, L. Di, M. H. Kobir, “Driving Additive Manufacturing Towards Circular Economy: State-of- the-Art and Future Research Directions”, 3D Printing and Additive Manufacturing (IF= 5 . 355) , under review, 2023
8.A. Sotoodeh, L. Di, Y. Yang*, “Design of 3D printable LED heatsink inspired by firefly wings”, Proceedings ofthe ASME 2023 18th International Manufacturing Science and Engineering Conference MSEC2023, June 12-16, 2023, New Brunswick, New Jersey, USA, (2023).
9.M. A. U. A. Amin, Y. Yang*, M. H. Kobir, L. Di, “Experimental Study of Microscopic Morphology and Material Property for Recycled Polyamide 12 Powder in Selective Laser Sintering”, ASME 2022 International Manufacturing Science and Engineering Conference 2022, West Lafayette, Indiana, USA, (2022).
10.L. Di, G. Shah, and Y. Yang*, “Greenhouse Gas Emission Analysis of Integrated Production-Inventory Transportation Supply Chain Enabled by Additive Manufacturing”, ASME 2021 16th International Manufacturing Science and Engineering Conference, Cincinnati, OH, USA, (2021).
11.C. Kan, Z. Ye, Y. Yang, L. Di, D. Shah, D. Shah, “Multi-Extrusion Additive Manufacturing for Error Compensation: A Demonstrative Case Study”, ASME 2020 15th International Manufacturing Science and Engineering Conference, Cincinnati, OH, USA, (2020).
12.S. Wang, A. Sarrafan, T. Hoang, L. Di, Y. Yang, “An Optimal Control Approach for Additive Manufacturing Production with Waste Recycling Process”, IEEE Conference on Decision and Control, Singapore, 2025.
